Back to home
 

Corrosion of structural materials and electrochemistry in high temperature water of nuclear power systems

 
UCHIDA Shunsuke1
 1. Nuclear Power Engineering Center, Institute of Applied Energy, Tokyo, 105-0003, Japan (E-mail suchida@iae.or.jp)
 
Abstract: The latest experiences with corrosion in the cooling systems of nuclear power plants are reviewed.  High temperature cooling water causes corrosion of structural materials, which often leads to adverse effects in the plants, e.g., generating defects in materials of major components and fuel claddings, increasing shutdown radiation and increasing the volume of radwaste sources. Corrosion behaviors are much affected by water qualities and differ according to the values of water qualities and the materials themselves. In order to establish reliable operation, each plant requires its own unique optimal water chemistry control based on careful consideration of its system, materials and operational history. Electrochemistry is one of key issues that determine corrosion related problems but it is not the only issue. Most phenomena for corrosion related problems, e.g., flow-accelerated corrosion (FAC), intergranular stress corrosion cracking (IGSCC), primary water stress corrosion cracking (PWSCC) and thinning of fuel cladding materials, can be understood based on an electrochemical index, e.g., electrochemical corrosion potential (ECP), conductivities and pH. The most important electrochemical index, ECP, can be measured at elevated temperature and applied to in situ sensors of corrosion conditions to detect anomalous conditions of structural materials at their very early stages. In the paper, theoretical models based on electrochemistry to estimate wall thinning rate of carbon steel piping due to flow-accelerated corrosion and corrosive conditions determining IGSCC crack initiation and growth rate are introduced.
Keyword: nuclear power plant; corrosion; electrochemistry; electrochemical corrosion potential
 
      Click here for viewing full text.